First, found a hydraulic leak. Then, replaced the hose. After that, tested the system. Finally, pressure was normal. Now, checking the reservoir., First, found a loose connector. Then, secured the connection. After that, checked the signal. Finally, communication was restored. Now, testing the wiring., First, found a faulty sensor. Then, replaced the unit. After that, checked the indication. Finally, the reading was normal. Now, monitoring the sensor., First, found damaged wiring. Then, repaired the wires. After that, tested the circuit. Finally, power was restored. Now, checking the circuit breaker., First, found a damaged actuator. Then, replaced the unit. After that, tested the elevator. Finally, movement was normal. Now, inspecting the linkage., First, found low hydraulic pressure. Then, checked the pump. After that, inspected the valve. Finally, pressure was restored. Now, monitoring the hydraulic system., First, found an abnormal engine indication. Then, checked the sensor. After that, inspected the wiring. Finally, the indication was normal. Now, monitoring engine parameters., First, found worn brake pads. Then, replaced the pads. After that, tested the brakes. Finally, braking was normal. Now, inspecting the wheel assembly., First, found a tripped circuit breaker. Then, reset the breaker. After that, tested the circuit. Finally, power was restored. Now, checking the electrical panel., First, found a damaged control cable. Then, replaced the cable. After that, tested the rudder. Finally, movement was normal. Now, inspecting the control system., First, found a fuel leak. Then, replaced the seal. After that, checked the fuel line. Finally, the leak stopped. Now, inspecting the fuel tank., First, found a cracked panel. Then, removed the panel. After that, installed a new panel. Finally, the structure was inspected. Now, checking another panel., First, found an oil leak. Then, replaced the seal. After that, checked the oil level. Finally, the level was normal. Now, monitoring the engine., First, found a broken wire. Then, repaired the wire. After that, checked continuity. Finally, the circuit was normal. Now, testing another connection., First, found tire damage. Then, replaced the tire. After that, inspected the wheel. Finally, the landing gear was tested. Now, checking the brake assembly., First, found a loose bolt. Then, tightened the bolt. After that, inspected the fitting. Finally, the assembly was secure. Now, checking another fastener., First, found a faulty valve. Then, replaced the valve. After that, checked the pressure. Finally, the system was normal. Now, inspecting another hydraulic line., First, found a navigation fault. Then, checked the antenna. After that, inspected the connection. Finally, the signal was restored. Now, testing the navigation system., First, found surface corrosion. Then, cleaned the area. After that, treated the surface. Finally, the repair was inspected. Now, checking another section., First, found abnormal elevator movement. Then, adjusted the linkage. After that, tested the controls. Finally, movement was normal. Now, inspecting the flight-control system.

Troubleshooting Practice

per en/la
Imprimir
Incrustar

Tauler de classificació

Estil visual

Opcions

Canvia de fonament

Restaurar desada automàtica: ?