1) Which one of the following identifies the layout of rooms? a) Drawing. b) Specification. c) Risk assessment. d) Programme of work. 2) Which one of the following would provide details of materials? a) Specification. b) Risk assessment. c) Method statement. d) Programme of work. 3) Which scale should be used for a section drawing? a) 1:10 b) 1:50 c) 1:500 d) 1:1000 4) What is the image shown? a) W/C b) Sink. c) Bath. d) Door. 5) What is the hatching shown in the image on the far left? a) Concrete. b) Brickwork. c) Wrot timber. d) Unwrot timber. 6) What is the hatching shown in the image? a) Earth. b) Hardcore. c) Brickwork. d) Blockwork. 7) A datum is used to? a) Set joists. b) Hand a door. c) Fix door jambs. d) Paste wallpaper. 8) Which is a means of water harvesting? a) Smaller w/c cistern. b) Reuse of sewerage. c) Use of water butts. d) Restriction of water taps. 9) The main benefit of recycling materials onsite is to reduce? a) Time scales. b) Plant costs. c) Labour costs. d) Use of raw materials. 10) Which type of foundation is shown in the image? a) Strip. b) Raft. c) Pile. d) Pad. 11) A typical concrete foundation is made up of fine aggregate, water, cement and? a) Clay. b) Lime. c) Gypsum. d) Coarse aggregate. 12) In a concrete mix of 1:3:6, what does 1 represent? a) Lime. b) Cement. c) Fine aggregate. d) Coarse aggregate. 13) A structure where the load of the roof is not carried by masonry is known as? a) Solid wall. b) Cavity wall. c) Stonework. d) Timber frame. 14) Which part of a wall retains heat in a building? a) DPC. b) Timber. c) Insulation. d) Wall ties. 15) Which of the following is plasterboard finished with? a) Board finish plaster b) stud finish c) Stud finish render d) Board finish render 16) What material is fine aggregate used for in mortar? a) Sand b) Lime c) Cement d) Plasticiser 17) In a mortar mix ratio 1 to 4, the 4 stands for? a) Sand b) lime c) admix d) cement 18) Which one of the following is an external wall finish? a) Plaster b) Render c) chipboard d) plaster board 19) A newly plaster and prepared wall requires a minimum of how many coats of standard of emulsion? a) 1 b) 2 c) 3 d) 4 20) The item shown in the image is know as? a) Bound rafters b) Hipped rafters c) Truss rafters d) Nail plate rafters 21) Which of the following paints would be applied after the primer? a) Satin b) Gloss c) Knotting d) Undercoat 22) Why is thermal insulation used in buildings? a) It reduces energy usages b) it improves the look of a house c) it improves the passage of sound d) it reduces the cost of building the home 23) Which of the following is regarded has a trade job role in construction? a) Joiner b) Labourer c) architect d) surveyor 24) What information must be recorded when taking a message? a) length of call b) Tone of voice c) Contact details d) Callers gender 25) Communicating positively with colleagues and others ? a) Can help avoid conflict b) Decreases productivity c) Results in mistakes being made d) Causes friction between workers 26) What is the best way of communicating on going safety considerations to operatives? a) Memo b) E-mail c) Posters d) Two way radio 27) What identifies dangers on a building site? a) Risk assessment b) Specification c) Drawing d) Method Statement

Mock Exam Principles of Building 101

I-Print kini
Embed

Leaderboard

Visual style

Mga Option

I-switch ang template

I-restore ang gi-autosave: ?