what does puwer stand for?, provision and use of work equipment regulations. , the extension table fitted at the back of a circular saw must be positioned?, less than 1200mm from the centre of the saw blade. , What type of tooth pattern should a crosscut saw have?, negative pitch, What does TCT stand for?, tungsten carbide tip, what should be the minimum length of a push stick. , 450mm, what are positive tooth pattern saw blade suitable for? , cutting along the grain, what should you do if you find a circular saw bench with a missing guard?, not use the machine and report to your employer straight away, what is the most effective form of dust collection in a joiners workshop?, fixed ducted system, what is the minimum size of saw blade compared to the largest?, 60%, what type of saw blade is best for ripping hard abrasive timber such as oak?, positive tooth pattern with TCT teeth, cutting hard abrasive timber will?, dull the cutting edge more quickly., what is the total width of the saw cut called?, kerf, the riving knife on a circular saw bench will help?, the timber binding, what is the most efficient method of timber conversion? , through and through, for saw blades of less than 600mm diameter the riving knife should be? , within 25mm of the top of the saw blade, which of the following defects causes bindind at the back of the circular saw bench during ripping operations?, case hardening, what does ACoP stand for? , approved code of practice, what should you do before any maintenance is carried out on a circular saw bench?, isolate the machine.

unit 211

by
I-Print kini
Embed

Leaderboard

Visual style

Mga Option

I-switch ang template

I-restore ang gi-autosave: ?