Reconstituted stone, Economical alternative to natural stone, BS1217, Standard defining reconstituted stone, Hydraulically pressed concrete split stone, Dry mix compressed and machine split, Casting stone, Fluid concrete poured into moulds, Facing stone, Decorative face with concrete backing, Split faced, Finish formed during splitting, Pitched faced, Dressed finish with projecting face, Bullnose faced, Rounded edge about 25mm radius, Sneck, Small square stone filling gaps, Leveller, Stone used to level uncoursed work, Dressed stone, Stone shaped to required finish, Riser, Vertical build-up stone element, Quoin, Special corner stone for bonding, Bonding bricks, Used beside quoins for half bond, 65mm stone, 29 stones per square metre, 140mm stone, 15 stones per square metre, 215mm stone, 14 stones per square metre, Movement joints, Allow movement and reduce cracking, Minimum movement joint allowance, 15mm, Fyfe Stone spacing, 8m, Marshall Stone spacing, 7.5m, Bradstone spacing, 6m, Minimum overlap, 100mm, Maximum vertical joint, 225mm or largest stone height, Area formula, Length × Height, Volume formula, Length × Height × Width, Manual handling, Moving loads by bodily force, Safe lifting, Lift with legs, avoid twisting, Storage good practice, Cover and keep off ground, Waste management, Reuse or recycle before disposal.

Reconstituted Stonework

af
Trykke
Integrere

Rangliste

Visuel stil

Indstillinger

AI-forstærket: Denne aktivitet indeholder indhold genereret af AI. Lær mere.

Skift skabelon

)
Gendan automatisk gemt: ?