The network administrator needs to configure a switch so that it does not advertise its VLANs to other switches. Which of the following is the best solution to achieve the requirement?, Configure the switch as VTP transparent., Configure all its VLANs as private VLANs., Configure the switch as a VTP client., Configure all the switch ports as access ports., Which of the following formats can be used when configuring a WPA2 PSK in the Cisco Wireless LAN Controller GUI?, Binary, Hexadecimal, Decimal, Base64, Which DNS record maps a domain name to an IP address in IPv6?, AAAA, NS, MX, A, Two collision domains, six broadcast domains, One collision domain, six broadcast domains, One broadcast domain, six collision domains, Two broadcast domains, six collision domains, Refer to the partial output of the show run command: snmp-server group ADMIN v3 priv. What statement is true about this configuration?, Cryptographic authentication is required, and the packets are encrypted., There is no cryptographic authentication, but there are encrypted packets., There is no cryptographic authentication or encrypted packets., Cryptographic authentication is required, but encrypted packets are not., Which of the following is a benefit of migrating a farm of on-premises email virtual servers to a software-as-a-service solution?, No need to manage user permissions, No need to manage the VMs, No need to manage mailbox permissions, No need to monitor available disk space for emails, Which of the following statements is a benefit of network automation?, It enables multi-tenancy, which makes intent-based networking possible., It reduces capital expenses., It reduces the operational effort required to provision services., The management plane is distributed, so reliability is increased., Which IPv6 address is valid?, 2001.db8.1..ab9.C0a8.102b, 2001:db8:1::ab9:C0a8:102b, 2001:db8:1:130g:ab9:C0a8:102b, 2001:db8:1:130h:ab9:C0a8:102b, Which of the following commands can be used to verify the configured SNMP security model?, show snmp chassis, show snmp group, show snmp engineid, show snmp community, Which two parameters can be verified using the ipconfig /all command? (Choose two.), Domain name to IP address mapping, MAC address, Locally configured routes, DHCP lease time, ARP entries, Which feature of the Cisco Wireless LAN Controller is an advancement from traditional wireless setups?, Support for all Lightweight Access Points, Centralized device configuration, Port mirroring, Access Point out-of-band management, What does the logging trap command do?, It sets the facility of syslog messages., It sets the severity level of syslog messages., It enables the display of log messages in terminal sessions., It sets the IP address of the SNMP server., Which of the following HTTP CRUD methods is used to create a loopback on a switch?, POST, PUT, PATCH, GET, How is an RJ-45 straight-through cable identified (прямий кабель)?, Cable wire Pin1 is swapped with Pin3, and Pin2 is swapped with Pin6 at the other end., Cable wires are in a mirrored sequence at the ends of the cable., Cable wire Pin2 is swapped with Pin5, and Pin1 is swapped with Pin4 at the other end., Cable wires are in the same sequence at both ends of the cable., Which tab in the WLAN configuration screen of a WLC configures VLAN mapping?, General, Security, Policy-Mapping, Advanced, Which three MAC functions are associated with a WLC? (Choose three.) WLC — це Wireless LAN Controller, контролер Wi-Fi, який керує точками доступу (Access Points)., Data encryption, Beacon exchanges, Management of roaming clients, Probe responses, QoS policing, Security management, What will be the result of executing the following command in a Windows command-line session ? ipconfig /release *s*, It sends the DHCPInform message to the DHCP server with the s parameter., It disables TCP/IP for adapters that contain letter s in their name and that are configured to obtain an IP address automatically., It sends the DHCPNACK message to the DHCP server with the s parameter., It discards the DHCP configuration for all NICs with an adapter name of * and s., What is the host portion of the following IPv6 address? `2001:a2c8:123d:0011::0/64`, `ffff:ffff:ffff:ffff`, `2001:a2c8:a33d`, `2001:a2c8:a33d:aa12`, `0000:0000:0000:0000`, Which feature of a switch can be used to ensure that DHCP server connections are trusted?, VLAN, Access control list, Port Security, DHCP snooping, What action does the router take when the following commands are configured? interface fastethernet0/0 ip address 222.16.220.95 255.255.255.224 no shut (!!! 255.224 — це /27, тобто останні 5 бітів IP-адреси належать хосту. 95 в двійкової = 01011111 -broadcast-адреса. Її не можна призначити інтерфейсу маршрутизатора.), It assigns the IP address to the interface and sends a reverse ARP, It displays a “Bad mask” error message, It displays a “Bad IP address” error message, It assigns the IP address to the interface and sends a gratuitous ARP, How is an RJ-45 straight-through cable identified?, Cable wire Pin2 is swapped with Pin5, and Pin1 is swapped with Pin4 at the other end of the cable., Cable wires are in the same sequence at both ends of the cable., Cable wire Pin1 is swapped with Pin3, and Pin2 is swapped with Pin6 at the other end of the cable., Cable wires are in a mirrored sequence at the ends of the cable., Which DHCP message forces a client to ask for another IP address?, DHCPNAK, DHCPOFFER, DHCPACK, DHCPDISCOVER, Which feature of an NGFW is designed to protect the network against malware infections? The Advanced Malware Protection (AMP) feature on a next-generation firewall (NGFW) uses a set of signatures to verify file transfers and block malware infections before they reach end devices., AMP, SPI, NGIPS, AVC, Which RSTP feature shuts down an access port once it receives a superior BPDU?, Port security, Loop guard, PortFast, BPDU guard, Which of the following formats can be used when configuring a WPA2 PSK in the Cisco Wireless LAN Controller GUI?, Base64, Decimal, Binary, Hexadecimal, Which of the following is a common type of output from a REST API call?, DAT, CRUD, YAML, JSON, Which of the following statements is a benefit of network automation?, It enables multi-tenancy, which makes intent-based networking possible., It reduces the operational effort required to provision services., The management plane is distributed, so reliability is increased., It reduces capital expenses.
0%
CCNA
Teilen
Teilen
von
Vikkyodessa
Inhalt bearbeiten
Speichern
Gefällt mir
Drucken
Einbetten
Mehr
Zuweisungen
Bestenliste
Mehr anzeigen
Weniger anzeigen
Diese Bestenliste ist derzeit privat. Klicke auf
Teilen
um sie öffentlich zu machen.
Diese Bestenliste wurde vom Eigentümer der Ressource deaktiviert.
Diese Bestenliste ist deaktiviert, da sich Ihre Einstellungen von denen des Eigentümer der Ressource unterscheiden.
Einstellungen zurücksetzen
Quiz
ist eine Vorlage mit offenem Ende. Es generiert keine Punkte für eine Bestenliste.
Anmelden erforderlich
Visueller Stil
Schriftarten
Abonnement erforderlich
Einstellungen
KI-Verbessert: Diese Aktivität enthält Inhalte, die von KI generiert werden.
Weitere Informationen.
Vorlage ändern
Alle anzeigen
Offene Ergebnisse
Link kopieren
QR-Code
Löschen
Soll die automatisch gespeicherte Aktivität
wiederhergestellt werden?