A visual inspection of a weld reveals small cavities or holes on the surface. What is the most likely defect?, Undercut, Slag Inclusion, Porosity, It is a groove melted into the base metal at the toe of the weld, which weakens the joint., Incomplete Fusion, Undercut, Crack, Which of the following defects is generally considered the most serious and always requires removal before rewelding?, Surface Porosity, Slag Inclusion, Crack, What is the primary purpose of a visual weld inspection?, To make the weld look prettier., To determine the tensile strength of the weld., To identify surface discontinuities that could lead to weld failure., An inspector sees that the weld metal has not stuck to the side of the joint, leaving a visible gap. What should be his conclusion?, Acceptable, as long as the weld is strong., Needs rewelding due to incomplete fusion., Needs rewelding due to undercut.

POST TEST

દ્વારા
પ્રિન્ટ
એમ્બેડ

લીડરબોર્ડ

દૃશ્યમાન શૈલી

વિકલ્પો

આના જેવું વધુ

Grade 3 Revision
Grade 3 Revision
દ્વારા
ગેમશો ક્વિઝ
Grade 3 - revision
Grade 3 - revision
દ્વારા
મેચ અપ
Welded Sounds
Welded Sounds
દ્વારા
બોક્સ ખોલો
Welded Sounds Nonsense 2.1
Welded Sounds Nonsense 2.1
દ્વારા
વ્હેક-અ-મોલ
Holes Revision ch 6-7-8
Holes Revision ch 6-7-8
દ્વારા
ક્વિઝ
Calitate sau defect?
Calitate sau defect?
દ્વારા
ગૃપ ગોઠવણી
PROCESOS DE SOLDADURA.
PROCESOS DE SOLDADURA.
દ્વારા
શબ્દ ખોજ
Review Voc ex 3a
Review Voc ex 3a
દ્વારા
રેન્ડમ કાર્ડ્સ

ટેમ્પલેટ બદલો

આપોઆપ સંગ્રહ થયેલ છે: ?