Cavity lintel, 150mm bearing, Concrete lintel, 100mm bearing, DPC, Stops rising damp, minimum 150mm above ground level, Partial fill insulation, Must build blockwork first, joints taped and batts are bonded, Retro-fit insulation, Blown in at a later date, EWI insulation, Fitted on external leaf, Vertical damp course, Prevents ingress of damp up openings, Cavity tray, Installed whenever a cavity is bridged, at an abutment or parapet wall, directs water outside., Weep holes, Allows moisture to leave the cavity, DPM, Stops damp rising through the floor, Wall ties, 450mm x 900mm spacings, Expansion wall ties, Allows movement on long lengths of masonry, Restraint straps, Ties masonry to components like roof and floor. Prevents lateral movement., Wall plate, Spreads the weight of the roof down the masonry, Gable end, Proprietary wall starters, Where new masonry is attached to old masonry., Air bricks, Allows air flow to enter the build, Architects drawings and specification, Where we can find information on components, Window sill, Direct water to outer leaf under a window., Full-fill insulation, Allows air flow through the fibres., Cavity closer, Seals cavity at an opening.

Walling components

만든이
인쇄
퍼가기

순위표

현재 순위표 기능을 개선하기 위해 노력하고 있습니다. 피드백을 제공하여 도움을 주세요.

피드백 제공

비주얼 스타일

옵션

현재 활동 설정을 개선하는 작업을 진행 중입니다. 여러분의 피드백을 주시면 도와주시기 바랍니다.

피드백 제공

템플릿 전환하기

자동 저장된 게임을 복구할까요?