A visual inspection of a weld reveals small cavities or holes on the surface. What is the most likely defect?, Undercut, Slag Inclusion, Porosity, It is a groove melted into the base metal at the toe of the weld, which weakens the joint., Incomplete Fusion, Undercut, Crack, Which of the following defects is generally considered the most serious and always requires removal before rewelding?, Surface Porosity, Slag Inclusion, Crack, What is the primary purpose of a visual weld inspection?, To make the weld look prettier., To determine the tensile strength of the weld., To identify surface discontinuities that could lead to weld failure., An inspector sees that the weld metal has not stuck to the side of the joint, leaving a visible gap. What should be his conclusion?, Acceptable, as long as the weld is strong., Needs rewelding due to incomplete fusion., Needs rewelding due to undercut..
0%
POST TEST
Kongsikan
Kongsikan
Kongsikan
oleh
Rollygabuyo
G11
Edit Kandungan
Cetakan
Benamkan
Lebih lagi
Tugasan
Papan mata
Paparkan banyak
Paparkan sedikit
Papan mata ini berciri peribadi pada masa ini. Klik
Kongsikan
untuk menjadikannya umum.
Papan mata ini telah dilumpuhkan oleh pemilik sumber.
Papan mata ini dinyahdayakan kerana pilihan anda berbeza daripada pemilik sumber.
Pilihan untuk Kembali
Kuiz
ialah templat terbuka. Ia tidak menjana skor untuk papan mata.
Log masuk diperlukan
Gaya visual
Fon
Langganan diperlukan
Pilihan
Tukar templat
Paparkan semua
Lebih banyak format akan muncul semasa anda memainkan aktiviti.
)
Buka keputusan
Salin pautan
Kod QR
Padam
Pulihkan autosimpan:
?
