Faded or faint prints - Replace toner carriage, Blank pages - Typically driver problem, but could be toner was installed with the package seal, or transfer roller is damaged, White stripes - Toner is poorly distributed, or transfer roller is dirty/damaged, Black stripes or whole page black - Primary charge roller is dirty or damaged. Or high bolt power supply to developer unit is malfunctioning- try printing with a known good cartridge, Speckling on output - could be lose toner. Clean the inside of the printer using appropriate vacuum, Vertical or horizontal lines - marks constantly on same place are often due to dirty feed rollers or a damaged photosensitive drum, Toner not fused to paper - output that smudges easily is an indication the fuser needs replacing., Double/echo image - photosensitive drum not cleaned properly. Or the drum is smaller than the sheet of paper. Try printing a series of images and see if the problem resolves itself. If not, replace the drub/toner cartridge, Incorrect chroma display - If print is wrong color, ensure toner cartridges are in the right location, and ensure there is enough toner in each cartridge. If the color is wrong and there is a shadow like effect, the transfer belt may be misaligned- try reseating them, Color missing - Try replacing the cartridge. If that doesn’t work, try cleaning the contacts between the printer and the cartridge,

Laser printer issues 1101

etter
Innebygd

Ledertavle

Visuell stil

Alternativer

Bytt mal

Gjenopprett automatisk lagring: ?