Wireless Access Point: A Wireless Access Point provides a link between ____ and ____ networks. It creates a wireless local area network that allows WiFi-____ to connect to a ____. Examples of a wireless access point in a public space could be a ____ or Bluetooth hotspot, for example a WiFi hotspot in a coffee shop or airport to provide access to the ____. A wireless access point may be a separate device or built into another device such as a ____. Router: Routers are used to transfer ____ between networks. Routers receive data packets and use the IP address in the packet header to ____ the best route to transmit the data. Data is transferred from router to router across the internet towards the ____ A router stores the IP address of each computer connected to it on the network and uses a list called a ____ to calculate the ____ and ____ route to transfer data. Switch: A switch is used to connect devices together on a ____. It receives ____ from a connected node, reads the destination address in the packet header and forwards the data directly to its ____. A switch will generate a list of the ____ of all devices connected to it when it receives data, and must scan for a ____ address before sending. An alternative to a switch is a hub but a hub is slower and less secure as it forwards a copy of received data to ____ connected nodes. NIC: A Network Interface Controller (NIC) commonly also known as a Network Interface Card is an internal piece of hardware that is required for the computer to connect to a ____. The card includes a ____ address which is used when sending data across a LAN. An ethernet cable is plugged into the network card to allow data to be exchanged between the device and a network. A NIC used to be a separate expansion card but is now typically ____ on the motherboard. Transmission Media: Although not technically a device, the communication channel along which data is transferred will affect performance. Three common types of transmission media include: ____ - used typically on a LAN to transfer data between nodes and hardware such as switches. Examples include Cat5e and Cat6. ____ - very fast but more expensive and fragile cables typically used to send data quickly along a WAN. Data is sent as pulses of light. ____ - older, slower, copper cables that are not used as much in modern times as they can be affected by electromagnetic interference.

Network hardware

Imprimir
Incorporar

Ranking

Estilo visual

Opções

Alterar modelo

Restaurar arquivo salvo automaticamente: ?