Resistance is measured in, Farads (F) , Henry (H), Ohms (Ω) , Hertz , when measuring an unknown voltage . set the meter to the ................. range setting., highest, middle, lowest, Rx 1, When measuring resistance the power in the circuit must be ........, on, off, it does not matter, high power, The measurement mode in figure is:, Voltage, Current, Resistance, Continuity, The unit of measuring electric current is:, Ohm (Ω), Henry (H), Ampere (A), Volt (V), The multi-meter mode, which can be used to test the fuse in figure is :, Continuity, Current, Volt, Off mode.

MULTIMETER

от
Печать
Внедрить

Таблица лидеров

Визуальный стиль

Параметры

Переключить шаблон

)
Восстановить автоматически сохраненное: ?