Needle Plate, The metal part located under the presser foot., Tension Control, Tension discs pinch the thread as it moves through the machine., Take Up Lever, A metal finger with a thread guide that moves up and down., Presser Foot, Holds the fabric in place., Reverse Button, A button that allows the machine to stitch backwards., Needle Clamp, Holds the needle in place., Power Switch, A switch to turn the machine on and off., Feed Dog, This regulates the stitch length as it feeds the fabric through the machine., Bobbin, Spool that holds the bottom thread inside the machine., Thread Guides, May be hoops, discs, or flat metal shapes that pinch or direct the thread to feed through the machine., Bobbin Winder, This holds the bobbin while the thread is being wound., Needle, Feeds and pushes the thread through the fabric., Spool Pins, Keeps the spool in place while the thread feeds through the machine., Foot Control, Foot control regulates the machine speed., Bobbin Case, Plate that holds the bobbin., Handwheel, Turn this wheel to adjust needle height.

Sewing Machine

от
Печать
Внедрить

Таблица лидеров

Визуальный стиль

Параметры

Переключить шаблон

Восстановить автоматически сохраненное: ?