Correct Method, Cutting on the waste side of the line, Always mark out on all side of your piece of timber, Start your cut with a groove first, Check both sides of your timber when cutting, Always cut with the saw vertical, Have the bevel of the chisel to the waste side when removing timber, Always wear safety goggles., A sharp pencil creates more accurate lines., Wrong Method, Cut your job as fast as possible, Mark our with a dull pencil, Use your timber to mark out the thickness of your timber around the entire piece baseline, Using a machine without the teachers permission, Chisel all the way through to the other side when pairing timber, Cutting timber sideways in vice, Using a 6mm chisel of breaking the grain when pairing, Gluing job without checking if its square

Select the correct method

由
打印
嵌入

视觉风格

活动设置 排行榜 作业

活动设置

排行榜

切换模板

恢复自动保存：？