Quick Vent Luer Lock connector, A Luer Lock connector used to quickly vent air from the circuit during priming or operation., De-airing membrane (with yellow protective cap), A hydrophobic membrane that allows air to escape while preventing blood leakage; protected by a removable cap., Gas inlet, Port through which fresh sweep gas enters the oxygenator., Water connector, Connector used to circulate temperature-controlled water through the heat exchanger., Opening for holder, Mounting point for attaching the oxygenator to a support or holder., Gas outlet, Port through which exhaust gas leaves the oxygenator., Blood inlet 3/8" connector, Connector through which venous blood enters the oxygenator., Luer Lock connector ("Venous sampling"), Sampling port used to obtain venous blood samples., Recirculation 1/4" connector, Connector used for the recirculation line during circuit priming or operation., Luer Lock connector ("Arterial sampling"), Sampling port used to obtain arterial blood samples., Blood outlet 3/8" connector, Connector through which oxygenated blood exits the oxygenator., Temperature connector, Port for connecting a temperature probe to monitor blood temperature., Dialysis lock with valve, Valved access port for connecting a dialysis or ultrafiltration circuit., Gas particle filter, Filter that removes particulate contaminants from the incoming gas supply., De-airing valve, Valve used to evacuate trapped air from the device or extracorporeal circuit.

Quadrox - definitions

由
打印
嵌入

排行榜

视觉风格

选项

切换模板

恢复自动保存：？