What could you do to avoid any unwanted overspray landing on a prepped panel while carrying out a within panel basecoat blend?, Use a blower while applying the paint, Create a tunnel using brown paper to avoid any material travelling down the panel, Use a high viscosity paint, Direct mask it with some 2 inch tape, What should a paint technician create in order to get the closest possible paint match before applying paint to the vehicle?, A detailed damage report, A photograph of the vehicle showing which panels match, A job card, A spray out card, If you were blending basecoat into an adjacent panel which finish would need most consideration to get the best colour blend?, Solid, Metallic, Three Stage Pearl, What do some basecoat systems have to assist in a seamless basecoat blending process?, A blending additive / agent, A formula with more metallic particles, Tinted clearcoats, A fade out thinner sprayed on any transitions, What might the paint technician do with the spraying equipment when working on a localised basecoat blend?, Turn the pressure up, Turn the air cap 90 degrees for better application, Turn the pressure down, Use a larger set up, What defect could be removed from basecoat with a very fine grade abrasive prior to clearcoat being applied?, Dust nibs, Mottling, Tiger Striping, Poor coverage, True or false: An effect /drop coat is required on a solid colour?, True, False

Basecoat Application

由
打印
嵌入

排行榜

视觉风格

选项

切换模板

恢复自动保存：？