1) What portable power tool is used to make round holes through wood or metal? a) miter saw b) drill c) sander 2) What pliers are used to reach into recessed areas? a) slip-joint pliers b) side-cutting pliers c) long-nose pliers 3) A hammer drill is used to drill holes in a) metal b) masonry c) wood 4) When Thomas used a die to cut threads on a metal rod, he used oil to: a) lubricate the rod. b) harden the rod. c) clean the rod. 5) The type of handsaw used to cut wood with the grain is a a) hand ripsaw. b) hand crosscut saw. c) combination saw. 6) Which saw is used to cut across the grain of wood? a) b) c) 7) A ripsaw blade is used to: a) make rounded molding. b) cut with the grain of the wood c) cut circles in wood. 8) If a welder wants to mark metal so that there will be a scratch or permanent mark, he/she should use: a) a pencil. b) chalk. c) an awl. 9) Which hand(s) should be used when operating a portable belt sander? a) Both b) Right c) Left 10) James measures and marks a board correctly. If he saws on the waste side of the line and leaves the line, the size of the board will be: a) the appropriate length.he appropriate length. b) longer than needed. c) thicker than needed.

tle

由
打印
嵌入

排行榜

视觉风格

选项

切换模板

恢复自动保存：？