1) When setting out a building, what would be determined from a TBM? a) Frontage line b) Position of the building c) Finished floor level d) Boundary line 2) What is the area of a triangle? a) WxD b) DxH c) LxB d) WxH/2 3) A ground floor load bearing wall supports the........ a) Foundations b) Weight above c) Oversite concrete d) Damp proof membrane 4) Non-loadbearing stud partitions re required to..... a) Support the floor above b) Divide up the floor space c) Distribute the weight of the roof d) Support the staircase 5) Which insulation is most effective under a solid floor? a) Mineral wool b) Polyisocyanurate c) Polystyrene balls d) Cork sheeting 6) 1 litre of emulsion covers 13m2. How many litres is needed to cover 52m2 of wall area? a) 2 litres b) 3 litres c) 4 litres d) 5 litres 7) When constructing a solid ground floor what is the purpose of the blinding sand? a) To provide a smooth base for the hardcore b) To provide a smooth base for the DPM c) To prevent moisture from rising from the ground d) To waterproof the floor in case of flooding 8) Which of the following supports the floor boards? a) Joists b) Blinding sand c) Wall plate d) Sleeper wall 9) If a room is 3m wide and 6m long, how many metres of 100mm wide floorboards are required to cover the area? a) 18m b) 90m c) 180m d) 210m 10) 80m of floor boarding is required for a job, however the 5% wastage has not been included. What is the total amount of floor boarding required? a) 85m b) 84m c) 76m d) 75m

Unit 202d

由
打印
嵌入

排行榜

视觉风格

选项

切换模板

恢复自动保存：？