A Reciprocating Saw is a handheld saw commonly used for demolition and remodeling. You can use it to cut through many types of materials such as wood, metal, PVC and nails. Get ready to tear the house down!, A screw and a bolt are similar types of fastener typically made of metal and characterized by a helical ridge, called a male thread (external thread)., a tool, most often a hand tool, consisting of a weighted "head" fixed to a long handle that is swung to deliver an impact to a small area of an object. This can be, for example, to drive nails into wood, to shape metal (as with a forge), or to crush rock., a power tool, typically powered by a battery, that has two modes; drilling and screw driving. It will usually have at least two speeds. The low-speed setting is for screw driving mode, and it will have a torque selection ring near the chuck., also called a wrecking bar, pry bar or prybar, pinch-bar, or occasionally a prise bar or prisebar, colloquially, in Britain and Australia sometimes called a jemmy or jimmy (also called jemmy bar),[1] gooseneck, or pig foot, is a tool consisting of a metal bar with a single curved end and flattened points, often with a small fissure on one or both ends for removing nails or to force apart two objects., the pin-shaped fastener used in engineering, woodworking and construction, Goggles, or safety glasses, are forms of protective eyewear that usually enclose or protect the area surrounding the eye in order to prevent particulates, water or chemicals from striking the eyes., a covering for the hand worn for protection against cold or dirt and typically having separate parts for each finger and the thumb., an upright support in the wall of a building to which sheathing, drywall, etc., are attached, protective devices that cover moving pieces of machinery that may pose a danger to workers, a tool consisting of a hard blade, wire, or chain with a toothed edge. It is used to cut through relatively hard material, most often wood., is a protective device specifically designed to break the circuit every time there is an imbalance between incoming and outgoing current.

Tools

由
打印
嵌入

视觉风格

显示所有
活动设置 排行榜 作业

活动设置

排行榜

切换模板

恢复自动保存：？