The actual shoulder measurement is 15 inches. What is the final measurement used in drafting?, 6 in., 7 1/2 in., 8 in., 15 in., The bust is 36 inches. What is the final measurement after dividing by 4?, 8 in., 9 in., 10 in., 12 in., The waist is 30 inches. What is the correct final waist measurement?, 6 in., 7 in., 7 1/2 in., 8 in., The hip is 38 inches. What is the final hip measurement used in drafting?, 8 1/2 in., 7 in., 7 1/2 in., 8 in., The bust distance is 7 inches. Why is it divided by 2 in drafting?, To make the blouse narrower, To find dart position, To shorten the blouse length, To reduce bust size, The blouse length is 26 inches, while the full bodice length is 10 inches. What is the difference?, 14 in., 15 in., 16 in., 18 in., The sleeve width is 12 inches. What is the final measurement used in drafting?, 5 in., 6 in., 7 in., 8 in., The armhole (upper) actual measurement is 14 inches. What is the final measurement?, 6 in., 7 in., 7 1/2 in., 8 in., How is FN measured when shaping the hip area?, 1/4 bust + 1 in., 1/4 waist + 1 1/2 in., 1/4 hip + 1/2 in., 1/2 bust distance, How do you connect points N and T at the bottom of the blouse?, With a straight line, With a sharp angle, With a slightly curved line, With a dart line, What is the very first point called when starting the front blouse draft?, B, A, C, D, How many inches is AC when drafting?, 3 in., 4 in., 5 1/2 in., 6 in., How is AD (armhole depth) measured for a medium size blouse?, 7 in., 8 1/2 in., 9 1/2 in., 10 in., What is AG measured as when drafting?, 1 in., 2 in., 3 in., 4 in., How do you find point J on the pattern?, By dividing the hip measurement, By squaring down from H to C, By halving the bust distance, By marking 1 inch from the armhole, Which measurement is used to locate point O (the dart line)?, 1/2 bust distance, 1/4 bust measurement, 1/2 waist measurement, Full blouse length, How much is marked on both sides of point O to form the dart (OP and OQ)?, 1/4 in., 1/2 in., 5/8 in., 1 in., Which tool is used to connect points K, L, and I to shape the front armhole?, , , , , Why is the neck circumference (12 inches) divided by 2 in drafting?, To reduce fabric use, To make the neck smaller, Because it is drawn on the fold, To shorten the blouse, The bust height is 6 inches. What does this measurement help to determine?, The blouse length, The dart vertical position, The waistline curve, The neckline depth.

Drafting Pattern

autor
Odštampaj
Ugradi

Tabela

Vizuelni stil

Postavke

Promeni šablon

Vrati automatski sačuvano: ?