Which standard and clause is this test performed according to? - The test is performed according to BIFMA X5.9-2019 Clause 20 (Mod.)., What is the load applied during this test? - The applied load during this test is 20lbs., What is the acceptance criterion regarding the pull-out force? - It shall "not exceed" "7lbs"., What is the maximum allowable pull-out force? - The maximum allowable pull-out force is 7lbs., Should the pull-out force be below or above the specified limit? - It should "not exceed" the limit., Is it acceptable if the pull-out force is exactly 7lbs? - Yes, because it does "not exceed" 7lbs., If the measured pull-out force is 8lbs, does it pass the test? - No, because it "exceeds" 7lbs., Is the test performed with a 10lbs or 20lbs load? - The load used in this test is 20lbs, not 10lbs., Which test clause was modified in this standard application? - This test is conducted in accordance with Clause 20, which has been modified., What organization publishes the X5.9-2019 standard? - BIFMA is the organization that publishes the X5.9-2019 standard.,

Drawer Pull Out Force.

ustvaril/-a
Natisni
Vdelaj

Lestvica vodilnih

Flash karte je odprta predloga. Ne ustvarja rezultatov za lestvico vodilnih.

Vizualni slog

Možnosti

Preklopi predlogo

Obnovi samodejno shranjeno: ?