Solids can be categorised into conductors, semiconductors or ____ by their ____ and their ability to ____ electricity. Every ____ has its own characteristic energy band structure. For a solid to be conductive, both ____s and accessible ____ states must be available. The ____ in atoms are contained in energy ____. When the atoms come together to form ____, the electrons then become contained in energy bands separated by gaps. For ____, we have the situation where one or more bands are partially filled. Some metals have free ____ and partially filled valence bands, therefore they are highly conductive. Some metals have overlapping ____ and conduction bands. Each band is partially filled and therefore they are ____. In an ____, the highest occupied band (called the valence band) is full. The first unfilled band above the valence band is the ____ band. For an insulator, the gap between the valence band and the conduction band is ____ and at room temperature there is not enough ____ available to move electrons from the valence band into the conduction band where they would be able to contribute to conduction. There is no ____ conduction in an insulator. In a ____, the ____ between the valence band and conduction band is smaller and at ____ there is sufficient ____ available to move some electrons from the valence band into the conduction band allowing some conduction to take place. An ____ in temperature increases the conductivity of a semiconductor During manufacture, semiconductor may be ____ with specific impurities to increase their conductivity, resulting in two types of semiconductor, ____-type and n-type. When a ____ contains the two types of doping in adjacent layers, a p-n junction is formed. There is an electric field in the p-n junction. The electrical properties of this p-n junction are used in a number of devices. Diodes can be ____ biased or reverse biased. Forward bias reduced the electric field, reverse bias increases the electric field. LEDS are forward biased p-n ____ diodes that emit ____. The forward bias potential difference across the junction causes electrons to move from the conduction band of the n - type semiconductor towards the conduction band of the p-type semiconductor. Photons are emitted when electrons 'fall' from the conduction band into the ____ band either side of the junction. solar cells are p-n junctions designed so that a potential difference isproduced when ____ are absorbed. (This is known as the photovoltaic effect.) The absorption of photons provides energy to ‘raise’ electrons from the valence band of the ____ to the conduction band. The p-n junction causes the electrons in the conduction band to move ____ the n-type semiconductor and a ____ is produced across the solar cell.
0%
Semiconductors and p-n junctions
共用
由
Gw17mcgillivray
Higher
Physics
編輯內容
嵌入
更多
排行榜
顯示更多
顯示更少
此排行榜當前是私有的。單擊
共用
使其公開。
資源擁有者已禁用此排行榜。
此排行榜被禁用,因為您的選項與資源擁有者不同。
還原選項
完成句子
是一個開放式範本。它不會為排行榜生成分數。
需要登錄
視覺風格
字體
需要登錄
選項
切換範本
顯示所有
播放活動時將顯示更多格式。
打開結果
複製連結
刪除
恢復自動保存:
?