Correct Method, Cutting on the waste side of the line , Always mark out on all side of your piece of timber , Start your cut with a groove first , Check both sides of your timber when cutting , Always cut with the saw vertical, Have the bevel of the chisel to the waste side when removing timber, Always wear safety goggles. , A sharp pencil creates more accurate lines. , Wrong Method, Cut your job as fast as possible , Mark our with a dull pencil , Use your timber to mark out the thickness of your timber around the entire piece baseline, Using a machine without the teachers permission, Chisel all the way through to the other side when pairing timber, Cutting timber sideways in vice , Using a 6mm chisel of breaking the grain when pairing, Gluing job without checking if its square.

Select the correct method

โดย
สั่งพิมพ์
ฝัง

ลีดเดอร์บอร์ด

สไตล์ภาพ

ตัวเลือก

สลับแม่แบบ

คืนค่าการบันทึกอัตโนมัติ: ใช่ไหม