1) It gives the detail and overall sizes of the object. In this type of dimension, the external size of an object is represented. a) dimension b) location dimension c) size dimension 2) A ________ is a measurement such as length, width, or height. a) dimension b) specification c) overall dimension 3) It merely locates part or parts and features of the object. a) details dimension b) location dimension c) overall dimension 4) In this method of dimensioning, it is written in two directions in the whole drawing. It is written upward and at the right side and is read from the bottom and right side of a drawing. a) aligned method  b) uni-directional method c) directional method 5) Provide size or location information concerning any feature or of an object other than its over-all dimension. a) detail dimensions b) location dimension c) size dimension 6) It indicates the over-all width, height and depth of an object. a) uni-directional lines b) extension lines c) overall dimension 7) ____________ is a continuous thin line. it is indicated by arrowheads; it is drawn parallel to the surface whose length must be indicated. a) dimension lines b) extension lines c) uni-directional lines 8) In this method, the whole dimension is written in the same direction in the whole drawing. This direction is generally vertical. a) uni-directional lines b) dimension lines c) extension lines 9) It may seem a bit basic, but a few exercises with the shapes of numbers comes before dimensioning. a) letters b) arrow heads c) numbers 10) __________ drawing are fine, dark, solid lines that extend outward from a point on a drawing to which a dimension refers. a) dimension lines b) extension lines c) lines 11) _____________ are used to indicate the dimension line. Usually, the arrowhead must include angles of a minimum of 15°. a) dimension lines b) lines c) arrow heads

RECAP TIME!

โดย
สั่งพิมพ์
ฝัง

ลีดเดอร์บอร์ด

สไตล์ภาพ

ตัวเลือก

สลับแม่แบบ

คืนค่าการบันทึกอัตโนมัติ: ใช่ไหม