Bolt to the engine block, Bell housing, The clutch cover plate is bolted to the flywheel, and its diaphragm spring clamps the driven plate to the flywheel, The flywheel is bolted to the rear end of the crankshaft. Part of its surface mates to the driven plate, Pressure plate, The driven plate is located on the splined end of the gearbox input shaft, through which it transmits power when clamped between the flywheel and pressure plate, The gearbox input shaft is splined to allow the driven plate to transmit torque , The clutch operation starts at the pedal. It is connected to either a cable or a hydraulic master cylinder., The release bearing is operated by a fork., The tongues of the diaphragm spring point inwards. When the clutch pedal is depressed, the release bearing pushes against the inner rim of the diagram, releasing clamping pressure on the driven plate..

Clutch Components

สั่งพิมพ์
ฝัง

ลีดเดอร์บอร์ด

สไตล์ภาพ

ตัวเลือก

สลับแม่แบบ

คืนค่าการบันทึกอัตโนมัติ: ใช่ไหม