Resolution - This is the smallest change in the quantity being measured by a measuring instrument that can be observed. For example ± 1 mm on a 1 metre ruler., Anomaly - A value in a set of results which is seen to be much bigger or smaller than the rest of the values in the set., True value - This is the value that would be obtained in ideal conditions., Uncertainty - The range within which the true value can be expected, e.g. “the temperature is 20 °C ± 2 °C", Measurement error - The difference between a measured value and the true value., Systematic error - A systematic error is normally caused by the apparatus used and causes readings to differ from the true value by the same amount each time. The effect of systematic errors cannot be reduced by increased repeats., Random error - This occurs when results vary unpredictably from one measurement to the next. These are normally due to errors by the person taking the measurements. The effect of random errors can be reduced by taking more measurements and calculating a mean., Accuracy - A measurement result is considered accurate if it is judged to be close to the true value., Precision - A set of precise measurements show very little spread about the mean value., Repeatability - The precision obtained when repeat readings are obtained by a single learner/ group., Repeatable - A measurement is repeatable, if a single learner/ group using the same method and equipment, obtains the same or similar results when they carry out the investigation again., Reproducibility - The precision obtained when repeat readings are obtained by a different learners/ groups., Reproducible - A measurement is reproducible, if different learners/ groups obtain the same or similar results. This could include using different equipment/methods.,

Results and errors

โดย
สั่งพิมพ์
ฝัง

ลีดเดอร์บอร์ด

สไตล์ภาพ

ตัวเลือก

สลับแม่แบบ

คืนค่าการบันทึกอัตโนมัติ: ใช่ไหม