Object Line - A line that represents a visible surface in that view., Dimension - A line with arrows at both ends or at 1 end that tells the length, width, depth, radius, or diameter of a particular surface., Drawing Scale - This indicates the how the drawing's views are sized in relation to the actual object being built., Hidden Line - These "dashed" lines represent a hidden surface in the view where they appear., Cutting Plane Line - This line shows the part builder where a Section View is generated from., Orthographic View - These are the standard views shown on all Engineering Drawings and consist of the Top, Front, and Right Side views., Phantom Line - These lines represent where 2 surfaces would come together if they were not radiused., Section View - These Views are used to show surfaces and features that may be difficult to see or understand in an Orthographic View., Auxiliary View - This view is used to look at a surface that is angled and may not clearly depict all the surfaces features on the Orthographic Views. The Auxiliary View is viewed perpendicular to the surface it is showing., Cross Hatching - These lines appear in a Section View and depict material that is being cut through according to the Cutting Plane Line, Radius - a Radius is the dimension of a circular object from it's curved surface to it's center point from where the curved surface is generated., Title Block - Title Blocks are used on Engineering Drawings to give the user basic information about the drawing. Such as part name, drawing scale, material, who created the drawing, and approvals among other things. Thay generally appear in the bottom righthand corner of the drawing., Diameter - This is the dimension of a circular object that extends from one side of a circle, through it's center point, and extends directly to the opposite side of the circle., Ellipse - An Ellipse depicts a circular object viewed from a particular angle., Revision Block - Normally located in the upper right corner of the drawing. It is a documented history of the revisions made to the drawing to correct past errors or improvement to the design of the part.,
0%
TERMS USED ON ENGINEERING DRAWINGS (DRAFTING)
Ibahagi
Ibahagi
Ibahagi
ni
Dunnran
9th Grade
10th Grade
Ipakita ang Iba Pa
I-edit ang Nilalaman
Naka-embed
Higit pa
Leaderboard
Magpakita pa
Huwag gaanong magpakita
Ang leaderboard na ito ay kasalukuyang pribado. I-click ang
ibahagi
upang gawin itong pampubliko.
Ang leaderboard na ito ay hindi pinagana ng may-ari ng aktibidad.
Hindi pinagana ang leaderboard na ito dahil ang iyong mga pagpipilian ay naiiba sa may-ari ng aktibidad..
Ibalik ang Opsyon
Pagtutugma
ay isang bukas na template. Hindi ito bumubuo ng mga marka para sa isang leaderboard.
Kailangan maglog-in
Estilo ng visual
Mga Font
Kailangan maglog-in
Mga pagpipilian
Magpalit ng template
Ipakita lahat
Mas marami pang format ang lilitaw habang nilalaro ang aktibidad.
Ibalik ng awtomatikong pag-save:
?