what does puwer stand for? - provision and use of work equipment regulations. , the extension table fitted at the back of a circular saw must be positioned? - less than 1200mm from the centre of the saw blade. , What type of tooth pattern should a crosscut saw have? - negative pitch, What does TCT stand for? - tungsten carbide tip, what should be the minimum length of a push stick. - 450mm, what are positive tooth pattern saw blade suitable for?  - cutting along the grain, what should you do if you find a circular saw bench with a missing guard? - not use the machine and report to your employer straight away, what is the most effective form of dust collection in a joiners workshop? - fixed ducted system, what is the minimum size of saw blade compared to the largest? - 60%, what type of saw blade is best for ripping hard abrasive timber such as oak? - positive tooth pattern with TCT teeth, cutting hard abrasive timber will? - dull the cutting edge more quickly., what is the total width of the saw cut called? - kerf, the riving knife on a circular saw bench will help? - the timber binding, what is the most efficient method of timber conversion? - through and through, for saw blades of less than 600mm diameter the riving knife should be? - within 25mm of the top of the saw blade, which of the following defects causes bindind at the back of the circular saw bench during ripping operations? - case hardening, what does ACoP stand for? - approved code of practice, what should you do before any maintenance is carried out on a circular saw bench? - isolate the machine,

unit 211

tomonidan
Chop etish
qo'shib qo'yish

Ilg'orlar ro'yxati

Qayta tiklash ochiq-oydin shablon. Etakchilar ro'yxati uchun ballar yaratmaydi.

Vizual uslub

Moslamalar

Namunani almashtirish

Tahrirlashni davom ettirish: ?