Centre punch - To create a dimple in metal before drilling., Odd leg Callipers - To create a parallel line to the edge of metal, Spring dividers - To mark curves/circles on metal, Scriber - To create markings on metal when measuring, Engineers Square - To mark a right angle on metal, Outside callipers - To find an outside measurement of a cylindrical shape, Inside callipers - To find a measurement inside an object, Pop rivet gun - To assemble two pieces of metal with rivets, Tin snips - To cut thin sheets of metal, Bending bar - To form metal around, G-Clamp - For holding pieces of wood in place whilst being glued etc, Sash cramps - to hold together projects for an extended period of time., Vice - to hold the workpiece during operations such as sawing, planing, and drilling, Marking gauge - Create parallel markings to the edge of a piece of wood, Try-square - Create a right angle to the edge of a piece of wood, Bevelled edge chisel - used to create clean, sharp edges/joints on wood, Mortise chisel - For chopping out mortices and cutting other joints., ball pein hammer - Peening (surface hardening by impact) and many tasks, such as striking punches and chisels, cross pein hammer - general purpose carpenter's hammers used for driving in nails., hide mallet - they can hit soft metals like brass, copper, gold and silver without denting or marring their surfaces, tap and dies - to create screw threads, which is called threading., junior hacksaw - to cut and shape metals, tube and some plastics., wooden mallet - usually used in carpentry to knock wooden pieces together, or to drive dowels or chisels., flat file - a flat surface and is used to file larger, flat areas of metal, to straighten up edges, Bradawl - to make indentations in wood or other materials in order to ease the insertion of a nail or screw., Hand router/Granny's tooth - smoothing out sunken panels, and more generally for all depressions below the general surface of the pattern., Pliers - to grip small objects, reach awkward places, holding wires, bend loops, and attach wires., Jack plane - a general-purpose woodworking bench plane, used for dressing timber down to size in preparation for truing and/or edge jointing., Coping saw - to cut intricate external shapes and interior cut-outs in woodworking or carpentry, Tenon saw - used for making deep, accurate cuts in furniture joinery. It should make straight, fast cuts without binding.,

Tools

طباعة
تضمين

لوحة الصدارة

النمط البصري

الخيارات

تبديل القالب

استعادة الحفظ التلقائي: ؟