: To wire a UK three-pin plug, first gather a small screwdriver, wire cutters/strippers, and the cable., Ensure the appliance is unplugged, and the power is off., Unscrew and remove the plug cover to expose the terminals., Cut the cable to the required length and strip 2-3 cm of outer insulation to reveal the three inner wires., Then, strip about 0.5 cm of insulation from the ends of the wires., Identify the wires: brown (live) connects to the L terminal, blue (neutral) connects to the N terminal, and green/yellow (earth) connects to the E terminal., Loosen the screws on the terminals and securely insert each wire into its respective terminal, ensuring no loose strands are exposed., Tighten the screws firmly., Next, fix the cable into the cable grip at the base of the plug, making sure it is clamped tightly to prevent movement., Replace the plug cover and screw it back into place., Finally, double-check all connections for security and correctness before using the plug.,

Wiring a plug

podle
Tisk
Vložit

Výsledková tabule/Žebříček

Vizuální styl

Možnosti

Přepnout šablonu

Obnovit automatické uložení: ?