A visual inspection of a weld reveals small cavities or holes on the surface. What is the most likely defect?, Undercut, Slag Inclusion, Porosity, It is a groove melted into the base metal at the toe of the weld, which weakens the joint., Incomplete Fusion, Undercut, Crack, Which of the following defects is generally considered the most serious and always requires removal before rewelding?, Surface Porosity, Slag Inclusion, Crack, What is the primary purpose of a visual weld inspection?, To make the weld look prettier., To determine the tensile strength of the weld., To identify surface discontinuities that could lead to weld failure., An inspector sees that the weld metal has not stuck to the side of the joint, leaving a visible gap. What should be his conclusion?, Acceptable, as long as the weld is strong., Needs rewelding due to incomplete fusion., Needs rewelding due to undercut.

POST TEST

από
Εκτύπωση
Ενσωμάτωση

Κατάταξη

Οπτικό στυλ

Επιλογές

Κι άλλα σαν αυτό

Grade 3 Revision
Grade 3 Revision
από
Τηλεπαιχνίδι
Grade 3 - revision
Grade 3 - revision
από
Αντιστοίχιση
Welded Sounds
Welded Sounds
από
Άνοιξε το κουτί
Welded Sounds Nonsense 2.1
Welded Sounds Nonsense 2.1
από
Χτύπα το ποντίκι
Holes Revision ch 6-7-8
Holes Revision ch 6-7-8
από
Κουίζ
Calitate sau defect?
Calitate sau defect?
από
Ταξινόμηση κατά ομάδα
PROCESOS DE SOLDADURA.
PROCESOS DE SOLDADURA.
από
Κρυπτόλεξο
Review Voc ex 3a
Review Voc ex 3a
από
Τυχαίες κάρτες

Αλλαγή προτύπου

Επαναφορά αυτόματα αποθηκευμένου: ;