Which standard and clause is this test performed according to? - The test is performed according to BIFMA X5.9-2019 Clause 20 (Mod.)., What is the load applied during this test? - The applied load during this test is 20lbs., What is the acceptance criterion regarding the pull-out force? - It shall "not exceed" "7lbs"., What is the maximum allowable pull-out force? - The maximum allowable pull-out force is 7lbs., Should the pull-out force be below or above the specified limit? - It should "not exceed" the limit., Is it acceptable if the pull-out force is exactly 7lbs? - Yes, because it does "not exceed" 7lbs., If the measured pull-out force is 8lbs, does it pass the test? - No, because it "exceeds" 7lbs., Is the test performed with a 10lbs or 20lbs load? - The load used in this test is 20lbs, not 10lbs., Which test clause was modified in this standard application? - This test is conducted in accordance with Clause 20, which has been modified., What organization publishes the X5.9-2019 standard? - BIFMA is the organization that publishes the X5.9-2019 standard.,

Drawer Pull Out Force.

por
Imprimir
Incrustar

Tabla de clasificación

Tarjetas flash es una plantilla abierta. No genera puntuaciones para una tabla de clasificación.

Estilo visual

Opciones

Cambiar plantilla

¿Restaurar actividad almacenada automáticamente: ?