Bolt - a screw-like metal object without a point, used with a nut to fasten things together, Cable - a set of wires, covered by plastic, that carries electricity, phone signals, etc., Nut - a small piece of metal with a hole in it through which you put a bolt, Chisel - a tool with a long metal blade that has a sharp edge for cutting wood, stone, etc., Plug - a small plastic or rubber object with two or three metal pins, attached to the end of a wire on a piece of electrical equipment and pushed into a special opening in a wall to connect the equipment to a supply of electricity, Screw - a thin, pointed piece of metal with a raised edge twisting round along its length and a flat top with a cut in it, used to join things together, especially pieces of wood, Screwdriver - a tool for turning screws, consisting of a handle joined to a metal rod shaped at one end to fit in the cut in the top of the screw, Spanner/wrench (AE) - a metal tool with a shaped end, used to turn nuts and bolts, Saw - a tool with a blade or sharp cutting points, used for cutting hard materials such as wood or metal, Washer - a flat ring of metal, rubber, or plastic that is put somewhere, especially between a screw or bolt and a surface, in order to make a better connection between them , Antenna - a metal receiver for radio and TV signals, Adapter - a device that is used to connect two pieces of equipment,
0%
Tools
Jaa
Jaa
Jaa
tekijä
Evasegurazgz
FP
Muokkaa sisältöä
Tulosta
Upota
Lisää
Tehtäviä
Tulostaulu
Näytä enemmän
Näytä vähemmän
Tämä tulostaulu on tällä hetkellä yksityinen. Jos haluat tehdä siitä julkisen, valitse
Jaa
.
Tehtävän omistaja on poistanut tämän tulostaulun käytöstä.
Tämä tulostaulu on poistettu käytöstä, koska vaihtoehdot eroavat tehtävän omistajan vaihtoehtoista.
Palauta Optiot
Liukuhihna
on avoin malli. Se ei luo tulostaululle pisteitä.
SIsäänkirjautuminen vaaditaan
Visuaalinen tyyli
Fontit
Tilaus vaaditaan
Vaihtoehdot
Vaihda mallia
Näytä kaikki
Saat lisää muotoiluasetuksia pelin aikana.
Avoimet tulokset
Kopioi linkki
QR-koodi
Poista
Säilytetäänkö automaattisesti tallennettu tehtävä
?