Step 1 - Explains procedure, speaking clearly, slowly, and directly, maintain face-to-face contact whenever possible, Step 2 - Before using stethoscope, wipes bell diaphragm and earpieces of stethoscope with alcohol, Step 3 - Client's arm is positioned with palm up and upper arm is exposed, Step 4 - Feels for brachial artery on inner aspect of arm, at end of elbow, Step 5 - Places blood pressure cuff snugly on client's upper arm, with sensor/arrow over brachial artery site, Step 6 - Earpieces of stethoscope are in ears and bell/diaphragm is over brachial artery site, Step 7 - Candidate inflates cuff between 160 mm Hg to 180 mm Hg. If beat is heard immediately upon cuff deflation, completely deflate cuff. Re-inflate cuff to no more than 200 mm Hg, Step 8 - Deflates cuff slowly and notes the first sound (systolic reading), and last sound (diastolic reading) (If rounding needed, measurements are rounded UP to the nearest 2 mm of mercury), Step 9 - Removes cuff, Step 10 - Signaling device within reach, Step 11 - Before recording, washes hands, Step 12 - After obtaining reading using BP cuff and stethoscope, records both systolic and diastolic pressures each within plus or minus 8 mm of evaluator's reading,
0%
Measures and Records Manual Blood Pressure
Megosztás
Megosztás
Megosztás
szerző:
Bbrandt
Tartalom szerkesztése
Beágyazás
Egyebek
Ranglista
Több megjelenítése...
Részletek elrejtése
Ez a ranglista jelenleg privát. Kattintson a
Megosztás
és tegye nyílvánossá
Ezt a ranglistát a tulajdonos letiltotta
Ez a ranglista le van tiltva, mivel az opciók eltérnek a tulajdonostól.
Beállítások visszaállítása
a(z) Egyezés
egy nyílt végű sablon. Nem hoz létre pontszámokat egy ranglistán.
Bejelentkezés szükséges
Vizuális stílus
Betűtípusok
Bejelentkezés szükséges
Beállítások
Kapcsoló sablon
Az összes megjelenítése
További formátumok jelennek meg a tevékenység lejátszásakor.
Nyílt eredmények
Link másolása
Törlés
Automatikus mentés visszaállítása :
?