Before using the pillar drill its important to check that the ____ is set at the correct ____ and the drill bit is secured in the ____. The ____ must be down and the ____ and ____ buttons would be checked. The workpiece must be securely held with a ____ vice or with a ____. After using the drill the drill bit must be removed, the worktable must be ____ and the machine must be ____ (to prevent ____ switch on). Before using the mortise machine its important to check that the ____ is clear of all shavings and other ____ material. The ____ must be correctly set and the ____ and ____ buttons should be checked. The workpiece must be securely held in the ____. After using the mortise machine, the bed must be ____ and the machine must be ____ (to prevent ____ switch on). Before using the lathe, the ____ should be checked. The wooden workpiece must be ____ between the driving fork and the ____. The tool ____ must be set at the correct ____, and be a ____ distance from the wooden workpiece so it ____ freely. The start and stop buttons would be checked and the emergency stop should be ____. The ____ should be turned on to remove small ____ particles ____ the lathe is used. After using the lathe, the ____ must be cleaned and the machine must be isolated (to prevent accidental switch on). Before using the belt sander, the ____ should be inspected for wear, ____ or tearing. The worktable must also be ____ of any debris or dust. The start and stop buttons would be checked and the emergency stop should be ____. The ____ should be turned on to remove small ____ particles ____ the belt sander is used. After using the belt sander, the ____ must be cleaned and the machine must be isolated (to prevent accidental switch on). Before using a corded power drill its important to check that the ____ and ____ are free from damage. The drill ____ must be securely tightened in the ____, with the workpiece held in a ____ or with a clamp. Once the process is complete, the plug would be ____ and the drill bit should be removed. Before using a corded jig saw its important to check that the ____ and ____ are free from damage. The jig saw ____ must be securely attached and facing in the correct ____ direction, with the workpiece held in a ____ or with a clamp. Once the process is complete, the plug would be ____ and the blade should be removed.

N5PW - Logbook Prep 01 (Machine Tools)

di
Incorpora

Classifica

Stile di visualizzazione

Opzioni

Cambia modello

Ripristinare il titolo salvato automaticamente: ?