Asymmetric tread - Improves handling when cornering, marked inside and outside on tyre sidewall, TWI - Tread wear indicator set at 2mm depth, Radial - Plies come off the bead at 90 degrees, Crossply - Plies come off the bead at 40-45 degrees, Rotational tyre tread - Disperses water in one direction of rotation only, must be fitted on correct side of vehicle, 5107 - The first number is the week and the second number is the year the tyre was manufactured, Tyre size - Tread width 185mm, aspect ratio 75%, wheel diameter 14 inches, Centre tread wear - Tyre wear caused by over inflated tyre, Tyre pressures - Measured in psi and bar, Advantages of an alloy wheel - Lighter and better air flow to the brakes, Inner and outer edges of tread worn - Tyre wear caused by under inflation of tyre, Schrader valve - Allows air to be added and removed from the tyre, Steel wheel - Poor air flow to brakes and heavy but cheaper to manufacture, Wheel well - This is used to allow the tyre bead to be eased over the rim, Space saver wheel - Must be driven at reduced speed over short distances, Static imbalance - Imbalance that may cause the wheel and tyre assembly to tramp, Dynamic imbalance - Imbalance that may cause the wheel and tyre assembly to shimmy, Run flat tyres - Reinforced side walls support the weight of the vehicle if the air has escaped,
0%
Wheels and Tyres
Kongsikan
oleh
Seannhodson
Motor Vehicle
Edit Kandungan
Benamkan
Lebih lagi
Papan mata
Paparkan banyak
Paparkan sedikit
Papan mata ini berciri peribadi pada masa ini. Klik
Kongsikan
untuk menjadikannya umum.
Papan mata ini telah dilumpuhkan oleh pemilik sumber.
Papan mata ini dinyahdayakan kerana pilihan anda berbeza daripada pemilik sumber.
Pilihan untuk Kembali
Padankan
ialah templat terbuka. Ia tidak menjana skor untuk papan mata.
Log masuk diperlukan
Gaya visual
Fon
Langganan diperlukan
Pilihan
Tukar templat
Paparkan semua
Lebih banyak format akan muncul semasa anda memainkan aktiviti.
Buka keputusan
Salin pautan
Kod QR
Padam
Pulihkan autosimpan:
?