Von Neumann - Computer architecture which introduced the idea of using stored programs, ALU - The component which carries out arithmetic and logic operations, Control Unit - Ensures synchronisation of data flow and programs by sending signals along the control bus, System clock - Produces timing signals on the control bus to ensure synchronisation, Immediate Access Store - Holds all data and programs needed to be accessed by the control unit, Accumulator - Temporary general purpose register to store numerical values at any part of a calculation, Register - Temporary memory component that holds data or instructions as part of the Fetch-Execute cycle. Can have general or specific uses. , Status register - Used to output 'flags' for arithmetic or logic processing, Flag - Indicates the state of a bit in the status register. , Address bus - Carries addresses data throughout the computer system, Data bus - Carries data from the processor to memory and input/output devices and vice versa. , Word - A group of bits used by a computer to represents a single unit of data. , Clock cycle - The vibration frequency of a 'clock' microchip. A 3 GHz clock sends pulses at a rate of 3 billion a second. , BIOS - Basic Input /Output System, Cache memory - a high speed axillary memory (compared to register memory) which permits high , Quad Core - A CPU made with a group of 4 cores, each made up of their own separate ALUs, control units and registers., Port - The external connection to a computer which allows communicate with peripheral devices. , Universal Serial Bus - A versatile type of port connecting devices to a computer, Asynchronous serial data transmission - A single wire being used to transmit data one bit at a time where the sender and receiver use different clock cycles. , High-Definition Multimedia Interface - The current standard for audio visual transmission, allows for 120Hz and high data transmission, Video Graphics Array - Transmits pixel data between devices, can carry 60Hz and 4 bit colour. , Fetch-Execute cycle - The repeating action a computer takes where instructions and data are brought from memory, decoded and the carried out. , Program Counter - A register used to to store the address of the instruction which is being executed, Current instruction register - A register used to hold the current instruction which is being executed. , Register Transfer Notation - Short-hand notation (simple reference notes) to show movement of data and instructions - used to show the fetch-execute cycle on paper, Interrupt - Signal send from a device of software to a rpocessor requesting attention - the processor pauses its current operation until the interrupt ahs been serviced), Interrupt priority - all interrupts are given a priority status so that the processor knows which should be serviced next, Interrupt service routine or handler - software that handles interrupt requests (e.g. "printer out of paper") and sends that request to the CPU.,

CPU Architecture

Imprimir
Incorporar

Ranking

Estilo visual

Opções

Alterar modelo

Restaurar arquivo salvo automaticamente: ?