Disconnect the power source, Clear the solder from the hole using a soldering iron and solder wick., Heat the solder to molten it., Pull the lead through., Suck the solder away using a solder sucker., Remove a coating of solder with a wick., If you can't remove all the solder, clip the leads close to the components., If you can't reach the leads, chop off the component close to its base..

Removing components

Таблица лидеров

Визуальный стиль

Параметры

Переключить шаблон

Восстановить автоматически сохраненное: ?