Step 1 - Explains procedure, speaking clearly, slowly, and directly, maintain face-to-face contact whenever possible, Step 2 - Before using stethoscope, wipes bell diaphragm and earpieces of stethoscope with alcohol, Step 3 - Client's arm is positioned with palm up and upper arm is exposed, Step 4 - Feels for brachial artery on inner aspect of arm, at end of elbow, Step 5 - Places blood pressure cuff snugly on client's upper arm, with sensor/arrow over brachial artery site, Step 6 - Earpieces of stethoscope are in ears and bell/diaphragm is over brachial artery site, Step 7 - Candidate inflates cuff between 160 mm Hg to 180 mm Hg. If beat is heard immediately upon cuff deflation, completely deflate cuff. Re-inflate cuff to no more than 200 mm Hg, Step 8 - Deflates cuff slowly and notes the first sound (systolic reading), and last sound (diastolic reading) (If rounding needed, measurements are rounded UP to the nearest 2 mm of mercury), Step 9 - Removes cuff, Step 10 - Signaling device within reach, Step 11 - Before recording, washes hands, Step 12 - After obtaining reading using BP cuff and stethoscope, records both systolic and diastolic pressures each within plus or minus 8 mm of evaluator's reading,
0%
Measures and Records Manual Blood Pressure
Podeli
Podeli
Podeli
autor
Bbrandt
Uredi sadržaj
Ugradi
Više
Tabela
Prikaži više
Prikaži manje
Ova tabela je trenutno privatna. Kliknite na
Podeli
da biste je objavili.
Pristup tabeli je onemogućio vlasnik sredstva.
Ova tabela je onemogućena pošto Vam se podešavanja razlikuju od podešavanja vlasnika sredstva.
Vrati podešavanja
Spoji
je otvoreni šablon. On ne generiše rezultate za tabelu rangiranja.
Prijava je obavezna
Vizuelni stil
Fontove
Prijava je obavezna
Postavke
Promeni šablon
Prikaži sve
Više formata će se pojaviti tokom igranja aktivnosti.
Otvoreni rezultati
Kopiraj vezu
Izbriši
Vrati automatski sačuvano:
?