The network administrator needs to configure a switch so that it does not advertise its VLANs to other switches. Which of the following is the best solution to achieve the requirement?, Configure the switch as VTP transparent., Configure all its VLANs as private VLANs., Configure the switch as a VTP client., Configure all the switch ports as access ports., Which of the following formats can be used when configuring a WPA2 PSK in the Cisco Wireless LAN Controller GUI?, Binary, Hexadecimal, Decimal, Base64, Which DNS record maps a domain name to an IP address in IPv6?, AAAA, NS, MX, A, Two collision domains, six broadcast domains, One collision domain, six broadcast domains, One broadcast domain, six collision domains, Two broadcast domains, six collision domains, Refer to the partial output of the show run command: snmp-server group ADMIN v3 priv. What statement is true about this configuration?, Cryptographic authentication is required, and the packets are encrypted., There is no cryptographic authentication, but there are encrypted packets., There is no cryptographic authentication or encrypted packets., Cryptographic authentication is required, but encrypted packets are not., Which of the following is a benefit of migrating a farm of on-premises email virtual servers to a software-as-a-service solution?, No need to manage user permissions, No need to manage the VMs, No need to manage mailbox permissions, No need to monitor available disk space for emails, Which of the following statements is a benefit of network automation?, It enables multi-tenancy, which makes intent-based networking possible., It reduces capital expenses., It reduces the operational effort required to provision services., The management plane is distributed, so reliability is increased., Which IPv6 address is valid?, 2001.db8.1..ab9.C0a8.102b, 2001:db8:1::ab9:C0a8:102b, 2001:db8:1:130g:ab9:C0a8:102b, 2001:db8:1:130h:ab9:C0a8:102b, Which of the following commands can be used to verify the configured SNMP security model?, show snmp chassis, show snmp group, show snmp engineid, show snmp community, Which two parameters can be verified using the ipconfig /all command? (Choose two.), Domain name to IP address mapping, MAC address, Locally configured routes, DHCP lease time, ARP entries, Which feature of the Cisco Wireless LAN Controller is an advancement from traditional wireless setups?, Support for all Lightweight Access Points, Centralized device configuration, Port mirroring, Access Point out-of-band management, What does the logging trap command do?, It sets the facility of syslog messages., It sets the severity level of syslog messages., It enables the display of log messages in terminal sessions., It sets the IP address of the SNMP server., Which of the following HTTP CRUD methods is used to create a loopback on a switch?, POST, PUT, PATCH, GET, How is an RJ-45 straight-through cable identified (прямий кабель)?, Cable wire Pin1 is swapped with Pin3, and Pin2 is swapped with Pin6 at the other end., Cable wires are in a mirrored sequence at the ends of the cable., Cable wire Pin2 is swapped with Pin5, and Pin1 is swapped with Pin4 at the other end., Cable wires are in the same sequence at both ends of the cable., Which tab in the WLAN configuration screen of a WLC configures VLAN mapping?, General, Policy-Mapping, Advanced, Security, Which three MAC functions are associated with a WLC? (Choose three.) WLC — це Wireless LAN Controller, контролер Wi-Fi, який керує точками доступу (Access Points)., Data encryption, Beacon exchanges, Management of roaming clients, Probe responses, QoS policing, Security management, What will be the result of executing the following command in a Windows command-line session ? ipconfig /release *s*, It sends the DHCPInform message to the DHCP server with the s parameter., It disables TCP/IP for adapters that contain letter s in their name and that are configured to obtain an IP address automatically., It sends the DHCPNACK message to the DHCP server with the s parameter., It discards the DHCP configuration for all NICs with an adapter name of * and s., What is the host portion of the following IPv6 address? `2001:a2c8:123d:0011::0/64`, `ffff:ffff:ffff:ffff`, `2001:a2c8:a33d`, `2001:a2c8:a33d:aa12`, `0000:0000:0000:0000`, Which feature of a switch can be used to ensure that DHCP server connections are trusted?, VLAN, Access control list, Port Security, DHCP snooping, What action does the router take when the following commands are configured? interface fastethernet0/0 ip address 222.16.220.95 255.255.255.224 no shut (!!! 255.224 — це /27, тобто останні 5 бітів IP-адреси належать хосту. 95 в двійкової = 01011111 -broadcast-адреса. Її не можна призначити інтерфейсу маршрутизатора.), It assigns the IP address to the interface and sends a reverse ARP, It displays a “Bad mask” error message, It displays a “Bad IP address” error message, It assigns the IP address to the interface and sends a gratuitous ARP, How is an RJ-45 straight-through cable identified?, Cable wire Pin2 is swapped with Pin5, and Pin1 is swapped with Pin4 at the other end of the cable., Cable wires are in the same sequence at both ends of the cable., Cable wire Pin1 is swapped with Pin3, and Pin2 is swapped with Pin6 at the other end of the cable., Cable wires are in a mirrored sequence at the ends of the cable., Which DHCP message forces a client to ask for another IP address?, DHCPNAK, DHCPOFFER, DHCPACK, DHCPDISCOVER, Which feature of an NGFW is designed to protect the network against malware infections? The Advanced Malware Protection (AMP) feature on a next-generation firewall (NGFW) uses a set of signatures to verify file transfers and block malware infections before they reach end devices., AMP, SPI, NGIPS, AVC, Which RSTP feature shuts down an access port once it receives a superior BPDU? BPDU (Bridge Protocol Data Unit) — повідомлення, якими комутатори обмінюються для роботи Spanning Tree Protocol (STP)., Port security, Loop guard, PortFast, BPDU guard, Which of the following formats can be used when configuring a WPA2 PSK in the Cisco Wireless LAN Controller GUI?, Base64, Decimal, Binary, Hexadecimal, Which of the following is a common type of output from a REST API call?, DAT, CRUD, YAML, JSON, Which of the following statements is a benefit of network automation?, It enables multi-tenancy, which makes intent-based networking possible., It reduces the operational effort required to provision services., The management plane is distributed, so reliability is increased., It reduces capital expenses., Which command displays the OSPF hello and dead timers?, show ip ospf neighbor, show ip ospf database, show ip ospf interface, show ip protocols, In server virtualization, which of the following statements best describes the role of a virtual switch?, A virtual switch connects both physical and virtual adapters and performs the VMs’ frames forwarding., A virtual switch is part of the VM that handles the switching of the VM’s frames., A virtual switch only connects virtual adapters and performs the VMs’ frames forwarding., A virtual switch is part of the hypervisor that separates the physical traffic and virtual traffic., Which command is used to find the MAC address of a device connected to a switch port?, show ip interface mac-address-table, show interface mac-address, show ip interface brief, show mac address-table, Why would a network use RFC1918?, To have addresses that do not use DHCP, To have addresses directly routable through the public internet, To have addresses that are registered by IANA, To have addresses that are available for local networks, Refer to the partial output of the show run command: snmp-server group ADMIN v3 priv What statement is true about this configuration?, There is no cryptographic authentication or encrypted packets., Cryptographic authentication is required, but encrypted packets are not., Cryptographic authentication is required, and the packets are encrypted., There is no cryptographic authentication, but there are encrypted packets., What is one of the advantages of using TFTP compared to FTP? (Trivial File Transfer Protocol), It supports both read and write operations., It does not require layer 2 adjacency between the server and the client., It does not require authentication., It only requires one session between the server and the client., Which three statements are true about voice ports? (Choose three.), If interface e0/4 is a voice port, it will appear in the output of the show interfaces e0/4 trunk command., The switch should consider incoming untagged traffic as data VLAN traffic. It should consider incoming tagged traffic as voice VLAN traffic., The switch should consider incoming tagged traffic as data VLAN traffic. It should consider incoming untagged traffic as voice VLAN traffic., A switch’s CDP configurations can be left to the default settings., If interface e0/4 is a voice port, it will appear in the output of the show interfaces trunk command., If port security is configured on a voice port, the default maximum MAC number should be used., A Cisco IP phone fails to establish a connection to the switch. The switch has a dedicated VLAN for voice traffic that has been configured correctly. What should be enabled on the switch to fix the problem? Cisco Discovery Protocol— виявляє сусідні Cisco-пристрої та може передавати телефону інформацію про Voice VLAN., CDP, FTP, QoS, TFTP, Which command would ensure that the IOS device password, MySecretPassword1, is not saved in plain text but instead encrypted with a one-way MD5 hash?, enable secret MySecretPassword1, password console MySecretPassword1, service password-encryption MySecretPassword1, enable password MySecretPassword1, Which route represents a host route?, ip route 10.12.120.3 0.0.0.0 10.13.120.3, ip route 10.12.120.3 255.255.255.255 10.13.120.3 190, ip route 0.0.0.0 255.255.255.255 10.13.120.3 190, ip route 0.0.0.0 0.0.0.0 fa0/1 190, A company needs to reach a legacy printer located in a SOHO. What is the best solution?, To use Cisco AnyConnect, To use a site-to-site IPsec VPN, To create an SSL remote access VPN, To configure an IPsec remote access VPN, Which tab should be used to configure the WLC with AAA override for a WLAN?, Advanced, QoS, General, Security, One port is not visible in the output of the show vlan command on a production switch. What is the most likely reason?, The port has been shut down., There are no devices connected., The port is down., The port has been converted into a trunk port., Which WPA2-PSK cipher mode offers the highest level of encryption?, WEP, TKIP/AES, AES, TKIP, Which two IP addresses can be assigned to end devices if a default gateway has been configured as 192.168.99.33/28? (Choose two.), 192.168.99.46 255.255.255.240, 192.168.99.47 255.255.255.240, 192.168.99.37 255.255.255.240, 192.168.99.1 255.255.255.240, 192.168.99.22 255.255.255.248, 192.168.99.72 255.255.255.248, Which two CDP details are displayed using the show cdp command? (Choose two.) CDP (Cisco Discovery Protocol), для решти обладнання- LLDP (Link Layer Discovery Protocol) — відкритий, стандартизований протокол, який підтримують пристрої різних виробників., Interface, Neighbors, Version, Timers, A Cisco switch and an IP phone are certified as PoE+. Which protocols can be used by both devices for power negotiations? (Choose two.), LLDP, CDP, LAG, VTP, LACP, A switch rejects the crypto key command in the process of enabling SSH. Which of the following can fix the issue?, Configure AAA., Update the IOS., Change the configuration register value to 0x2142., Use the ip ssh command instead of the crypto key command.

CCNA 1

by
Print
Embed

Visual style

Show all
Activity settings Leaderboard Assignments

Activity settings

Leaderboard

AI Enhanced: This activity contains content generated by AI. Learn more.

Switch template

Continue editing: ?