1) Improves handling when cornering, marked inside and outside on tyre sidewall a) Centre tread wear b) Wheel well c) Asymmetric tread d) Static imbalance 2) Tread wear indicator set at 2mm depth a) 5107 b) TWI c) Asymmetric tread d) Steel wheel 3) Plies come off the bead at 90 degrees a) TWI b) Advantages of an alloy wheel c) Radial d) Dynamic imbalance 4) Plies come off the bead at 40-45 degrees a) Crossply b) Space saver wheel c) Steel wheel d) Asymmetric tread 5) Disperses water in one direction of rotation only, must be fitted on correct side of vehicle a) Steel wheel b) Schrader valve c) Rotational tyre tread d) Space saver wheel 6) The first number is the week and the second number is the year the tyre was manufactured a) Space saver wheel b) Rotational tyre tread c) 5107 d) Run flat tyres 7) Tread width 185mm, aspect ratio 75%, wheel diameter 14 inches a) Asymmetric tread b) Inner and outer edges of tread worn c) Tyre size d) Steel wheel 8) Tyre wear caused by over inflated tyre a) Centre tread wear b) Tyre size c) Run flat tyres d) Asymmetric tread 9) Measured in psi and bar a) Tyre pressures b) Space saver wheel c) Radial d) TWI 10) Lighter and better air flow to the brakes a) Space saver wheel b) Steel wheel c) Crossply d) Advantages of an alloy wheel 11) Tyre wear caused by under inflation of tyre a) Schrader valve b) Inner and outer edges of tread worn c) Tyre size d) Tyre pressures 12) Allows air to be added and removed from the tyre a) Crossply b) Advantages of an alloy wheel c) Schrader valve d) Inner and outer edges of tread worn 13) Poor air flow to brakes and heavy but cheaper to manufacture a) TWI b) Run flat tyres c) Advantages of an alloy wheel d) Steel wheel 14) This is used to allow the tyre bead to be eased over the rim a) Advantages of an alloy wheel b) Wheel well c) Centre tread wear d) Inner and outer edges of tread worn 15) Must be driven at reduced speed over short distances a) Space saver wheel b) Wheel well c) Static imbalance d) Rotational tyre tread 16) Imbalance that may cause the wheel and tyre assembly to tramp a) Static imbalance b) Steel wheel c) Crossply d) Advantages of an alloy wheel 17) Imbalance that may cause the wheel and tyre assembly to shimmy a) Tyre size b) Centre tread wear c) Dynamic imbalance d) Advantages of an alloy wheel 18) Reinforced side walls support the weight of the vehicle if the air has escaped a) Dynamic imbalance b) Run flat tyres c) 5107 d) Asymmetric tread

LV04 Wheels and Tyres

by
Embed

Leaderboard

Visual style

Options

Switch template

Continue editing: ?