Ideal Intersection (Define) - 4-way traffic, at 90* from each other at each corner, Offset Intersection (Define) - traffic crosses at an angle, wide and sharp angles, aka crooked or slanted intersection, Why is right turn on ideal intersection dangerous? - length of bus (40 feet), location of front tire, visually challenging due to position of right-side mirror - 3 ft. from operator, 7 ft. from curb, Right Turn on Ideal Intersection (How to) - (1) activate turn signal at not less than 100 ft. from intersection; (2) use service brake accordingly and scan for pedestrians or obstructions; (3) place bus 3 - 4.5 ft. parallel to curb; (4) align door with curb on upcoming street; (5) limit speed to 10 mph; (6) end 3 -4.5 ft. from curb of new street , Obstructed Right Turn (Define) - making a right turn, a car or object is less than 40 ft. from corner of upcoming street , Obstructed Right Turn (How to) - place bus 3 - 4.5 ft. from car or object; align front door to edge of object on upcoming street; scan, turn at up to 10 mph, steering hand-over-hand, parallel reposition 3 - 4.5 ft. on new street, Double Right Turn Lanes (Define) - road signs or markings have 2 lanes for turning right, Double Right Turn (How to) - place front of bus on farthest right lane; scan for traffic or pedestrians, and yield if necessary; turn only when safe to do so, Offset Right Turn (Define) - turning right on offset or crooked/slanted intersection, Offset Right Turn (How to) - approach, set bus 3 - 4.5 ft. from curb; align front bumper to apex (highest point of curvature); at no more than 10 mph adjust speed, turning hand-over-hand, scanning blindspots; finish 3 - 4.5 ft. from curb on new street , Pivot Right Turn (Define) - a condition, obstruction, or hazard make it necessary for bus to turn while moving closer than 3 - 4.5 ft. from curb, Pivot Right Turn (How to) - place bus 12 - 18 inches (in.) parallel to curb; place center of rear tire (pivot point) to beginning of curvature of curb; proceed as usual; , 7 and Out Turn (Define) - purpose - to set up bus for an ideal turn onto narrow street after a bus stop, 7 and Out Turn (How to) - activate turn signal, scan; turn until bus 7 ft. from curb; turn back to 2 ft. from curb; finish 3 - 4.5 ft. parallel to curb of new street, Ideal Left Turn (Definition) - left turn on ideal intersection, use left turn lane (pocket), Ideal Left Turn (How to) - signal 100 ft. before intersection; place bus into left turn lane; scan for people or traffic; align left shoulder with center of upcoming street; move at up to 10 mph and align 3 - 4.5 ft. from curb of new street , Obstructed Left Turn (Define) - occurs when cars pull up further than limit of crosswalk or line, Obstructed Left Turn (How to) - same as left turn, ensure rear left of bus clear the car or obstacle; maintain right-side clearance, Multiple Left Turn Lanes (Define) - more than one lane for left turns, Multiple Left Turn Lanes (How to) - look for signs or road markings; put bus in furthest right lane for turning; scan for traffic, yield right of way if necessary; enter and reach reference point; complete turn at 90*; avoid sweeping turns (too wide), Offset Left Turn (Define) - turning left onto street with offset intersections, Offset Left Turn (How to) - identify center of street (note: center divider may not be actual center); move until front bumper in center of upcoming street (going too far will make turns too wide); finish on right curb as usual, When should a bus not enter an intersection? - when bus will not make it across; also prevents gridlocks; it is where high percentage of accidents occur, How do you approach an intersection? - apply brakes at 100 ft. before intersection crosswalk; scan left-right-left, check signs or markings; cross when safe, How do you approach a stop sign? - scan left-right-left, check signs or markings; yield right of way to vehicle on right if it arrives at the same time, How do you conduct a bus stop? - stop at each designated bus stop; activate turn signal 100 ft. ahead of stop; scan for obstacles, pedestrians, hazards; arrive at 3 - 4.5 ft. from curb; stop at 12 - 18 in. from curb, or 24 in. if wheelchair ramp needed, How do you enter a freeway? - actuate turn signal 150 ft. before onramp; speed up to flow of traffic; merge smoothly; keep 4-second distance from front vehicle for up to 40 mph, 5-second rule for 40+ mph, and +1 for each adverse condition, How do change lanes in a freeway? - check distance from front vehicle; scan; use 4-5-1 second rule; maintain speed and do not slow down, What lanes should you use while on the freeway? - stay on the second from the furthest right; the furthest right and left create more risks; use good judgment, What should you do if a large vehicle travels next to and at the same speed as the bus? - never drive side by side larger vehicles; slow down if going at the same speed to let it pass, How do you approach curves on the road? - slow down before entering curve; cover service brake and maintain speed; accelerate when passing midpoint of the curvature, How do you exit a freeway? - place bus in correct lane; activate signal at 250 ft. before exit; maintain speed and slow down as you enter offramp; posted speed limits are for cars, buses might need to go slower,
0%
Review: Basic Maneuvers Video
Share
by
Mle7520
Vocational / Technical
Adults
MTA Bus Operator
Edit Content
Embed
More
Leaderboard
Flash cards
is an open-ended template. It does not generate scores for a leaderboard.
Log in required
Visual style
Fonts
Log in required
Options
Switch template
Show all
More formats will appear as you play the activity.
Open results
Copy link
QR code
Delete
Continue editing:
?