Tendons are stressed after the concrete has hardened, Relaxation, Post tensioning, Pre Tensioning, Creep, An appreciable elongation or yielding of the material without any corresponding increase of load, Yield strength, Ultimate strength, Rupture strength, Proportional limit, Refers to the large amplitude vibration of an object or system when given impulses at its natural frequency, Kinetic, Momentum, Resonance, Force, It is measured by Richter scale, Ground acceleration, Intensity of observed, Magnitude of earthquake, Period of Earthquake, The material has the same elastic properties in all directions, Prismatic, Isotropic, Orthotropic, Homogeneous, Besides the epicenter, it describes the location of the earthquake., Focal depth, Dip angle, Fault time, Damage, Mechanical or thermal properties are unique and independent in three mutually perpendicular directions, Isotropic, Homogeneous, Prismatuc, Orthotropic, Identify the state of stress in a material described as follows: Stress at failure, Yield Strength, Ultimate Strength, Rupture Strength, Proportional limit, The internal resistance offered by a body per unit area to an externally applied load is called:, Strain, Stress, Pressure, Modulus, A structural member subjected mainly to bending is called:, Column, Beam, Truss, Slab, The bending stress in a beam is maximum at the:, Neutral axis, Centroid, Extreme fiber, Mid-depth, The axis along which the bending stress is zero is called the:, Neutral axis, Principal axis, Centroidal axis, Shear axis, The property of a cross-section that measures resistance to bending is:, Moment of inertia, Radius of gyration, Section modulus, Modulus of Elasticity, The ratio of ultimate stress to allowable stress is known as:, Factor of safety, Load factor, Stress factor, Strength ratio, The weight of the structure itself is classified as:, Live Load, Dead Load, Impact Load, Wind Load, Loads caused by the occupants, furniture, and movable equipment are called:, Live loads, Dead loads, Impact loads, Seismic loads, A beam supported at the both ends with no fixity is called:, Cantiliver beam, Continuous beam, Simply supported beam, Fixed beam, A beam fixed at ine end and free at the other is called:, Cantilever beam, Continuous beam, Overhanging beam, Fixed beam, The vertical displacement of a beam under load is called:, Rotation, Deflection, Deformation, Elongation, The twisting effect caused by an applied moment is known as:, Bending, Torsion, Shear, Compression, The sudden lateral bending of a compression member is called:, Yielding, Buckling, Fracture, Fatigue, The ratio of effective length of a column to its least radius of gyration is called:, Slenderness ratio, Stability factor, Load factor, Safety factor.

Psad 2

by
Print
Embed

Leaderboard

Visual style

Options

Switch template

Continue editing: ?