1) What do you call the subject taught in elementary and secondary schools that aims to develop manual skills and familiarity with tools and machines ? a) Information and Communication Technology b) Agriculture and Fishery Arts c) Family and Consumer Science d) Industrial Arts 2) Which of the following career opportunities are under construction ? a) Electrician b) Welder c) Carpenter d) Automotive Technician 3) They are responsible for installing, maintaining, repairing, and overhauling residential central air conditioning systems, commercial and industrial refrigeration and air conditioning systems, and combined heating, ventilation, and cooling systems. a) Tile Setter b) B. Construction Painter c) Electronics Technician d) Refrigerator and Aircon Technician 4) Which of the following is a job description of an Automotive mechanic? a) He is responsible for installing, maintaining, repairing, and troubleshooting electronic equipment and systems. b) He is responsible for installing, repairing, and maintaining electrical wiring systems c) He lays and sets tiles to create decorative wall, mural, and floor designs. d) Perform basic care and maintenance, including changing oil, checking fluid levels, and 5) Mrs. Sheena Eng has a small carinderia in their area. While cooking their rice for breakfast she noticed that the rice cooker is not functioning. She doesn't have any idea about repairing appliances, what is the safest thing to do? a) Call anyone in the area to repair the rice cooker. b) Search on the internet on how to repair it. c) Bring the rice cooker to an electronics technician d) Bring the rice cooker to a plumber or carpenter. 6) Pedro Potipar is a grade 7 student who was already exposed to construction. During his vacation, he always assists his father whenever there is a call for them . At a young age, he loves to lay and set tiles and he also knows how to build a small cabinet and even install fixtures. If you were Pedro, what career opportunities are you going to take? a) Pedro can enroll in short courses in any tesda to enrich his skills and to get a national certificate. b) Pedro should stop doing this kind of job and focus on school. c) Pedro can enroll to a cooking school to learn new skill aside from the construction skills d) Pedro should enjoy his vacation and play along with his friend. 7) . It is a set of standards and regulations that govern the safe and proper installation,operation, and maintenance of electrical systems in the Philippines. a) Philippine Electrical Code b) Road Traffics signs and symbols c) Philippine Electronics Code d) R.A. 7920 8) It is an act providing for a more responsive and comprehensive regulation for the practice, licensing and registration of electrical engineers and electricians. a) P.D. 1096 b) R.A. 4670 c) P.D. 1185 d) R.A. 7920 9) What government policy or law provides for all buildings and structures, a framework of minimum standards and requirements to regulate and control their location, site, design, quality of materials, construction, use, occupancy, and maintenance? a) Fire Code of the Philippines b) National Building Code c) Philippine Electrical Code d) Philippine Electronics Code 10) identify this traffic road sign a) no parking b) no right turn c) no entry d) no left turn 11) Mr. Andy Lim wants to build an extension of his light bulb store. Which among the following is a group of minimum requirements for a Building Permit? a) Sanitation, Roof, Electrical Requirements, Ventilation b) Cleanliness, Building, Mechanical Inspection, Foundation c) Floor, Entrance and Exit, Air, History d) Light and Ventilation, Post, Type of Persons Occupying, Address 12) The Philippine Electrical Code (PEC) is intended for _____ applications by government systems, and combined heating, ventilation, and cooling systems. a) Advisory b) Optional c) Mandatory d) All of the above 13) Before starting any installation work, alteration, repair or extension on any electrical system, bodies exercising legal jurisdiction over electrical installation. what type of permit is needed ? a) Building permit b) Working permit c) Electrical permit d) Mayor’s Permit 14) It is a kind of tool that is operated by air under pressure and is very powerful. a) Hand Tools b) Power Tools c) Hydraulic Tools d) Pneumatic Tools 15) Which type of device is used to measure the distance between two points using a slider with a scale and pointer to indicate the measurement? a) Digital gauge b) Vernier caliper c) Analog caliper d) Micrometer 16) What is the primary purpose of computer-based measuring instruments? a) Industrial marking b) Measuring and analyzing various processing data using software c) Removing rust from metal d) Crushing stones 17) A carpenter needs to drive nails, fit parts, forge metal, and break apart objects. Which tools does the carpenter need? a) Screwdriver b) Hammer c) Riveters d) Wrenches 18) An oscilloscope is a device that measures and displays voltage signals as a waveform while a temperature calibrator is a device that calibrates and tests temperature sensors and instruments. Therefore, if you need to analyze and diagnose circuit problems which among the two computer based instruments will you use? a) Oscilloscope b) Temperature Calibrator c) Both d) None of the above 19) Digital Instruments : Digital Caliper; Pneumatic Tools: _________________ a) Tire Inflator b) Logic Analyzer c) Precision Screwdrivers d) Laser Levels 20) What is the main difference between power tools and hand tools? a) Power tools are easier to use b) Power tools do not require electricity c) Hand tools are only used for large projects d) Power tools are lighter than hand tools 21) Which of the following is NOT included in the classification of tools in industrial arts? a) Carpentry and Masonry Tools b) Plumbing Tools c) Automotive and Engine Tools d) Hydraulic Tools 22) What instruments and equipment are specifically designed for installing,aligning,cutting, and finishing ceramic,porcelain, or stone tiles during tiling projects? a) Plumbing Tools b) Tile Settings Tools c) Electrical Tools d) Carpentry Tools 23) Mang Carson works in the masonry industry, and he was assigned in smoothing and finishing the freshly applied mortar or concrete on the wall. What would be the appropriate tools he needs to use? a) b) c) d) misskonasiya 24) Which is the most common spark plug size, used in many cars, motorcycles, and small engines? a) 21mm b) 16mm. c) 14mm. d) 18mm 25) What is the primary purpose of regular cleaning of hand tools? a) To prevent rust and corrosion b) To improve tool ergonomics c) To reduce tool weight d) To increase tool storage space 26) Which of the following is a recommended maintenance practice for equipment? a) Perform routine lubrication to reduce friction b) Ignore equipment warning lights and alarms c) Use equipment beyond its recommended capacity d) Store equipment in a dirty or dusty environment 27) A voltmeter reads 12.5 V on a circuit. What does this reading indicate? a) The circuit has a resistance of 12.5 ohms b) The circuit has a current of 12.5 amperes c) The circuit has a voltage of 12.5 volts d) The circuit has a power consumption of 12.5 watts 28) A tachometer reads 2500 rpm on a rotating shaft. What does this reading indicate? a) The shaft's rotational speed is 2500 revolutions per minute b) The shaft's rotational speed is 2500 revolutions per second c) The shaft's rotational speed is 2500 degrees per minute d) The shaft's rotational speed is 2500 radians per minute 29) An oscilloscope displays a waveform with a peak-to-peak amplitude of 10 V and a frequency of 100 Hz. What does this reading indicate? a) The signal has a maximum voltage of 10 V b) The signal has a frequency of 100 Hz and an amplitude of 5 V c) The signal has a peak-to-peak amplitude of 10 V and a frequency of 100 Hz d) The signal has a DC offset of 10 V 30) An ammeter reads 5 A on a circuit. What does this reading indicate? a) The circuit has a resistance of 5 ohms b) The circuit has a voltage of 5 volts c) The circuit has a current of 5 amperes d) The circuit has a power consumption of 5 watts 31) Which of the following is the correct way to handle a ruler or measuring tape? a) Throw it to your classmate. b) Use it as a pointer c) Carry it carefully and avoid swinging it around. d) Put it in your back pocket. 32) A multimeter (Volt-Ohm-Milliammeter) reads 200 ohms on a resistor. What does this reading indicate? a) The resistor has a resistance of 200 ohms b) The resistor has a voltage of 200 volts c) The resistor has a current of 200 amperes d) The resistor has a power consumption of 200 watts 33) What should you do if you notice a damaged or faulty measuring tool? a) Use it anyway, but be extra careful. b) Try to fix it yourself immediately. c) Report it to your teacher or supervisor and do not use it. d) Lend it to a classmate who needs it. 34) When performing calculations, what is an important safety practice? a) A. Rushing through the calculations to finish quickly b) Double-checking your work to avoid errors that could lead to mistakes in projects c) Copying answers from a classmate. d) Using any available tools, even if its not appropriate. 35) A tachometer reading of 6000 RPM indicates that an object is rotating at: a) 6000 meters per second b) 6000 revolution per minute c) 6000 radians per second d) 6000 rotations per hour 36) An oscilloscope is used to visualize: a) The flow of heat b) Changes in voltage over time c) The strength of a magnetic field d) The speed of light

reviewer

by
Print
Embed

Leaderboard

Visual style

Options

Switch template

Continue editing: ?